ตอกเสาเข็ม

lookmoo1981 profile image lookmoo1981

ตอกเสาเข็ม

เสาเข็มตอก คือ เสาเข็มที่ต้องใช้ปั้นจั่นตอกเสาเข็มลงไปในดินจนได้ความลึกที่ต้องการ ซึ่งเป็นวิธีการที่ได้รับความนิยมมากที่สุด เนื่องจากมีวิธีการก่อสร้างไม่ซับซ้อนและค่าใช้จ่ายไม่สูง แต่ในปัจจุบันมีปัญหาในการก่อสร้างในพื้นที่ที่มีอาคารรอบข้าง เนื่องจากแรงสั่นสะเทือนในการตอกและการเคลื่อนตัวของดินที่ถูกแทนที่ด้วยเสาเข็ม เสาเข็มตอกมีส่วนประกอบที่สำคัญ คือ
1.หัวเสาเข็ม (Head) คือ ส่วนบนสุดของเสาเข็มที่รองรับแรงกระแทกจากการตอกเสาเข็ม

2.ตัวเสาเข็ม (Foot) คือ ส่วนลำตัวของเสาเข็มมีพื้นที่ผิวมากกว่าส่วนอื่นๆ ทำหน้าที่รับแรงฝืดระหว่างเสาเข็มกับดิน

3.ปลายเสาเข็ม (Tip) คือ ส่วนล่างสุดของเสาเข็ม ทำหน้าที่เจาะทะลุชั้นดินและรับแรงแบกทาน มีหลายรูปแบบแล้วแต่ชนิดของดินที่ตอกผ่าน ได้แก่

ปลายหัวป้าน เหมาะกับการตอกผ่านดินอ่อน
ปลายหัวเข็ม เหมาะกับการตอกผ่านดินอ่อน โดยสวนปลายปักลงชั้นดินดานหรือ ทราย
ปลายหัวดินสอ เหมาะกับการตอกผ่านดินเหนียว กรวด ทราย โดยปลายเป็นเหล็กหล่อ
ปลายหัวปากกา เหมาะกับการตอกผ่านชั้นหิน

4.แผ่นเหล็กหัวเสาเข็ม (Driving Head) คือ แผ่นเหล็กที่ปิดทับบนหัวเสาเข็มซึ่งถูกยึดด้วยเหล็กสมอเทฝังเข้าเนื้อคอนกรีต ทำหน้าที่รองรับน้ำหนักการกระทบของตุ้มและใช้สำหรับเชื่อมต่อระหว่างเข็มท่อนบนและล่าง

งานเสาเข็มตอก เป็นจุดเริ่มต้นของความมั่นคงแข็งแรงของงานก่อสร้าง ดังนั้นเพื่อให้การตอกเสาเข็มได้คุณภาพตามที่ได้ออกแบบไว้ จึงจำเป็นต้องมีการวางแผนการตอกอย่างรอบคอบ ซึ่งสรุปเป็นขั้นตอนพอสังเขปได้ดังนี้

 ติดต่อสอบถาม

piling

Hammer piles are piles that require a crane to drive the piles into the soil until the desired depth is reached. which is the most popular method because there is no complicated construction method and the cost is not high But at present there is a problem in construction in the area with surrounding buildings. Due to the tremors in the hammering and the movement of the soil replaced by piles The piles have the following important components:

1. Head of the pile (Head) is the top part of the pile that supports the impact of pile driving.

2. The pile (Foot) is the body of the pile has a greater surface area than the other parts. serves to receive friction between the pile and the soil

3. The tip of the pile (Tip) is the lowest part of the pile. serves to penetrate through the soil layer and bear the load There are many forms depending on the type of soil that is hammered through.

The obtuse tip is suitable for hammering through soft soil.

The tip of the needle is suitable for hammering through soft soil. By the end of the garden, embroidering into a layer of shale or sand

The tip of the pencil tip is suitable for hammering through clay, gravel, sand, with a cast iron tip.

The tip of the pen is suitable for hammering through rock layers.

4.Driving Head is a steel sheet covered over the pile head, which is anchored by steel anchors embedded into the concrete. It serves to support the impact weight of the pendulum and is used to connect the upper and lower needles.

piling work It is the beginning of the stability of the construction work. Therefore, in order to drive the piles to the quality as designed. Therefore, careful planning of hammering is required. which can be summarized in brief steps as follows:

 ติดต่อสอบถาม

锤桩是需要起重机将桩打入土壤直至达到所需深度的桩。这是最流行的方法 由于施工方法不复杂,造价不高 但目前该地区的建筑施工存在问题。由于锤击时的震动和土体的运动被桩取代 桩有以下重要组成部分:

1、桩头(Head)是支撑打桩冲击力的桩顶部分。

2.桩(脚)是桩的主体比其他部分具有更大的表面积。用于接收桩和土壤之间的摩擦

3. 桩尖(Tip)是桩的底部。用于穿透土层并承受荷载 根据锤击的土壤类型,有多种形式。

钝头适用于敲击软土。

针尖适合敲击软土。到花园的尽头,绣成一层页岩或沙子

铅笔尖的尖端适合用铸铁尖锤击粘土、砾石、沙子。

笔尖适合敲击岩石层。

4.打桩头是覆盖在桩头上的钢板,由嵌入混凝土中的钢锚锚固。它用于支撑摆锤的冲击重量,用于连接上下针。

打桩工作 这是建设工作稳定的开始。因此,为了使桩达到设计的质量。因此,需要仔细规划锤击。可概括为以下简要步骤:

 ติดต่อสอบถาม

ความคิดเห็น

ประกาศล่าสุดในบอร์ดเดียวกัน