10 ขั้นตอน กว่าจะเป็น “น้ำบาดาล”

lookmoo1981 profile image lookmoo1981

10 ขั้นตอน กว่าจะเป็น “น้ำบาดาล”

1.วิเคราะห์ข้อมูล
- การรวบรวมข้อมูลที่มีอยู่แล้วในฐานข้อมูล พร้อมทำการวิเคราะห์ข้อมูลเบื้องต้น เพื่อให้รู้จักและทำความเข้าใจเกี่ยวกับสถานที่ สภาพภูมิประเทศ เส้นทางคมนาคม ชึ่งจะเป็นประโยชน์ในการวาง แผนสำรวจ การจัดเตรียมเครื่องมือ อุปกรณ์ และยานพาหนะ
- ข้อมูลน้ำบาดาลที่มีอยู่ ทำให้ทราบว่าในพื้นที่นั้นมีบริเวณใดบ้างมีศักยภาพของแหล่งน้ำบาดาลที่ดี มีปัญหาอุปสรรคใดบ้าง
2.สำรวจภาคสนาม
- สำรวจเส้นทางคมนาคมและพื้นที่ที่จะพัฒนา ได้แก่ สภาพหมู่บ้าน ประชากร ฯลฯ
- สำรวจด้านธรณีวิทยา เพื่อให้ทราบชนิดและลักษณะของหิน ทั้งนี้ เพราะหินต่างชนิดจะมีเนื้อหิน ความพรุนที่ต่างกัน ตลอดจนลักษณะของรอยแตก หรือรอยเลื่อน ฯลฯ
3.คัดเลือกสถานที่
เมื่อผ่านการวิเคราะห์ข้อมูลและแปลความหมายแล้วจะสามารถบอกถึงผลการสำรวจได้ คือ ชนิดของชั้นน้ำบาดาล เช่น เป็นชั้นกรวดทราย หรือเป็นหินแข็งที่มีรอยแตก ความลึกของชั้นน้ำบาดาล คุณภาพน้ำ กำหนดประเภทของเครื่องจักรเจาะบ่อที่เหมาะสมกับชั้นน้ำบาดาลได้ ดังนั้น จึงสรุปผลการสำรวจเพื่อกำหนดสถานที่จุดเจาะที่เหมาะสมได้ ทำให้ประหยัดเวลาและค่าใช้จ่ายที่จะใช้
4.เจาะบ่อน้ำบาดาล วิเคราะห์ชั้นดิน/หิน
จากข้อมูลในขั้นตอนข้างต้นจะทำให้สามารถคัดเลือกเครื่องจักรเจาะบ่อ ที่เหมาะสมกับชนิดหิน และความลึกของชั้นน้ำบาดาล นอกจากนั้นแล้วต้องเลือกช่างเจาะที่มีความชำนาญสูง เพื่อให้ได้ผลการเจาะที่สมบูรณ์และไม่เกิดการผิดพลาด
5.ออกแบบและก่อสร้างบ่อน้ำบาดาล
จากนั้นจึงใส่กรวดกรุข้างบ่อ ซึ่งเป็นกรวดที่มีขนาดเหมาะสมลงรอบๆท่อกรอง เพื่อเพิ่มประสิทธิ ภาพในการไหลของน้ำเข้าบ่อ และบริเวณเหนือชั้นกรวด ซึ่งเป็นท่อกรุบ่อนั้นต้องอุดข้างบ่อด้วยดินเหนียวสะอาดหรือฉีดด้วยซีเมนต์รอบๆข้างบ่อจนถึงบนผิวดิน ป้องกันน้ำเสียไหลซึมเข้าบ่อ
6.พัฒนาบ่อน้ำบาดาล
เพื่อขจัดสิ่งปนเปื้อนที่เกิดขึ้นในระหว่างการเจาะ เช่น น้ำโคลน เศษดิน เศษหิน ตลอดจนเม็ดดินเม็ดทรายละเอียดออกจากบ่อ เป็นต้น ทำให้กรวดกรุบ่อซึ่งอยู่รอบๆท่อกรอง หรือท่อเซาะกรองมีการเรียงตัวที่ดี และทำให้น้ำไหลเข้าบ่อได้สะดวกขึ้น
7.สูบทดสอบปริมาณน้ำบาดาล
- การคำนวณระดับความลึกที่เหมาะสมในการติดตั้งท่อดูดน้ำ กำหนดอัตราการสูบที่เหมาะสมกับบ่อได้
8.วิเคราะห์คุณภาพน้ำ
ตามปกติแล้วการจะนำน้ำบาดาลมาใช้อุปโภค บริโภค ต้องตรวจวิเคราะห์คุณภาพน้ำก่อน ได้แก่ วิเคราะห์คุณสมบัติทางกายภาพ เคมี แบคทีเรีย ตลอดจนสารพิษ ว่าคุณภาพน้ำที่ได้นั้นเป็นอย่างไร หากมีคุณภาพไม่เหมาะสมก็ต้องติดตั้งระบบปรับปรุงคุณภาพน้ำก่อนนำไปใช้ ซึ่งสารส่วนเกินที่พบบ่อย
9.ปรับปรุงคุณภาพน้ำและออกแบบระบบจ่ายน้ำ
หากต้องการทำเป็นระบบประปาบาดาล ต้องนำข้อมูลในขั้นตอนต่างๆข้างต้นมาคำนวณและออกแบบระบบที่เกี่ยวข้อง
10.นำไปใช้ประโยชน์
ในการพัฒนาแหล่งน้ำบาดาลขึ้นมาใช้โดยผ่านขั้นตอนต่างๆ ทางวิชาการน้ำบาดาลหลายขั้นตอนอย่างเป็นระบบ

     ติดต่อช่างเจาะบาดาล                   

10 steps to become "groundwater" 

1. Data analysis

- Collection of information that is already in the database ready to do preliminary data analysis to know and understand about the place topography transportation routes This is helpful in planning surveys, preparing tools, equipment and vehicles.

- Groundwater information available make it known in which areas there are potential of good groundwater resources. What obstacles are there?

2. Field survey

- Explore the transportation routes and areas to be developed such as village conditions, population, etc.

- Geological Survey In order to know the type and nature of the stone, because different types of rocks have rock texture. Different porosity as well as the appearance of cracks or faults, etc.

3. Select a place

After analyzing the data and interpreting the meaning, it can tell the survey results, namely the type of groundwater layer, such as a layer of gravel, sand. Or a hard rock with cracks The depth of the groundwater layer, water quality, determines the type of well drilling machinery suitable for the groundwater layer. Therefore, survey results can be concluded to determine the appropriate drilling site. This saves time and money to use.

4. Drill an artesian well. Soil/rock analysis

Based on the information in the above steps, well drilling machines can be selected. Suitable for the type of stone and the depth of the groundwater layer In addition, must choose a drill technician with high expertise. To achieve perfect drilling results and no errors.

5. Design and construction of artesian wells

Then put gravel next to the pond. Which is the appropriate size gravel around the filter pipe. To increase efficiency image of the flow of water into the well. And the area above the gravel layer Which is a pipe that fills the well, it must be filled with clean clay or sprayed with cement around the pond to the surface of the soil. Prevent sewage from seeping into the well.

6. Develop an artesian well

To remove contaminants that occur during drilling such as mud water, soil fragments, rock fragments, as well as grains of sand from the wells, etc., causing gravel to cover the well surrounding the filter pipe. Or the filter gouging pipe has a good arrangement. And make the water flow into the well more easily

7. Pumping to test the amount of groundwater

- Calculation of the optimum depth for the installation of the suction pipe. The pumping rate can be set suitable for the well.

8. Analysis of water quality

Normally, when using groundwater for consumption, the water quality must be analyzed first, i.e. the physical, chemical, bacterial, and toxic properties' analysis, and how the quality of the resulting water is. If the quality is not suitable, the water quality improvement system must be installed before use. Which is a common excess

9. Improve water quality and design a water distribution system.

To make an underground water supply system The information in the steps above must be used to calculate and design related systems.

10. Take advantage

in the development of groundwater resources through various steps systematic multistage groundwater academic

     ติดต่อช่างเจาะบาดาล                   

成为“地下水”的10个步骤

1. 数据分析

- 收集数据库中已有的信息,准备进行初步数据分析,以了解和了解该地点的地形运输路线这有助于规划调查、准备工具、设备和车辆。

- 可用的地下水信息使人们知道哪些地区具有良好的地下水资源潜力。有哪些障碍?

2. 实地调查

- 探索交通路线和待开发区域,如村庄条件、人口等。

- 地质调查为了了解石头的类型和性质,因为不同类型的岩石具有岩石纹理。不同的孔隙率以及裂纹或断层的出现等。

3. 选择地点

对数据进行分析、解释含义后,就可以判断出调查结果,即地下水层的类型,如砂砾层、砂层等。或有裂缝的坚硬岩石 地下水层的深度、水质,决定了适合该地下水层的钻井机械类型。因此,可以得出调查结果以确定合适的钻井地点。这样可以节省使用时间和金钱。

4. 钻一口自流井。土壤/岩石分析

根据以上步骤中的信息,可以选择钻井机。适用于石材的类型和地下水层的深度 此外,必须选择具有较高专业知识的钻探技术人员。以达到完美的钻孔效果且无差错。

5、自流井设计与施工

然后在池塘旁边放碎石。这是过滤管周围合适尺寸的砾石。提高效率的水流入井中的图像。而砾石层上方的区域,即填充井的管道,必须用干净的粘土填充或在池塘周围喷洒水泥到土壤表面。防止污水渗入井内。

6. 开发自流井

去除钻井过程中产生的污染物,如泥浆水、土壤碎片、岩石碎片以及井中的沙粒等,使砾石覆盖过滤管周围的井。或者过滤器气刨管布置得很好。并使水更容易流入井中

7.抽水测试地下水量

- 计算吸入管安装的最佳深度。泵速可以设置为适合井。

8、水质分析

通常,在使用地下水时,首先要对水质进行分析,即物理、化学、细菌和毒性分析,以及所得水的质量如何。如果水质不合适,使用前必须安装水质改善系统。这是一种常见的过剩

9、改善水质,设计配水系统。

制作地下水供应系统 上述步骤中的信息必须用于计算和设计相关系统。

10.利用

在地下水资源开发中分步进行系统的多阶段地下水学术研究

     ติดต่อช่างเจาะบาดาล                   

ความคิดเห็น

ประกาศล่าสุดในบอร์ดเดียวกัน