ขั้นตอนการแก้ไขอาคารทรุด

lookmoo1981 profile image lookmoo1981

ขั้นตอนการแก้ไขอาคารทรุด

แก้ไขอาคารทรุด
ปัจจุบันปัญหาการทรุดตัวของอาคาร เป็นปัญหาสำคัญประการหนึ่งซึ่งมีผลโดยตรงกับความปลอดภัยของผู้ใช้อาคาร และตัวอาคารเอง ซึ่งการทรุดตัวของอาคารนั้นพบเห็นกันมาทั้งในกรุงเทพฯ และต่างจังหวัด ลักษณะการทรุดตัวของอาคารอาจแตกต่างกันไปขึ้นอยู่กับส่วนประกอบต่างๆ ที่ส่งผลกระทบกับระบบฐานรากของอาคาร ซึ่งสรุปได้ดังนี้
1. อาคารทรุดตัวในแนวดิ่ง ซึ่งแบ่งได้ 2 เป็นประเภทดังนี้
1.1 ฐานรากทั้งหมดในอาคารทรุดตัว ซึ่งเป็นการทรุดตัวของอาคารทั้งหลังใกล้เคียงกัน แต่มีการทรุดตัวมาก ซึ่งส่วนใหญ่เกิดจากการที่ใช้เสาเข็มสั้นวางอยู่บนชั้นดินอ่อนมาก ซึ่งลักษณะการทรุดตัวประเภทนี้ จะไม่ค่อยพบรอยร้าวในโครงสร้างอาคาร
1.2 ฐานรากในอาคารทรุดตัวไม่เท่ากัน เกิดจากฐานรากมีการทรุดตัวที่แตกต่างกันมาก แต่ลักษณะการทรุดตัวของอาคารยังคงรูปในแนวดิ่ง ซึ่งอาคารที่ทรุดตัวประเภทนี้มักจะพบรอยแตกร้าวบนผนังเป็นแนวเฉียงกลางผนัง
2. อาคารทรุดเอียง ส่วนใหญ่เกิดจากการเยื้องศูนย์ของฐานรากอาคาร และเยื้องไปในทิศทางเดียวกัน หรือการทรุดเอียงของฐานรากที่อยู่บริเวณริมด้านนอกของอาคาร ทำให้การทรุดตัวของอาคารเอียงไปด้านใดด้านหนึ่ง และทำให้อาคารด้านตรงข้ามมีลักษณะเหมือนยกขึ้น การทรุดตัวประเภทนี้มักจะไม่เกิดรอยร้าวบนผนัง หรือโครงสร้าง แต่รอยร้าวส่วนใหญ่จะเกิดขึ้นที่บริเวณตอม่อหรือเสาเข็มของอาคารด้านที่ถูกยกขึ้น
สาเหตุการทรุดตัว ส่วนใหญ่เกิดจากสาเหตุดังนี้

1. เสาเข็มสั้นเกินไป
2. เสาเข็มบกพร่อง
3. ฐานรากเยื้องศูนย์
4. ปลายเสาเข็มอยู่บนดินต่างชนิดกัน
5. เกิดการเคลื่อนตัวของดิน
6. เสาเข็มรับน้ำหนักไม่ได้ตามความต้องการ

การแก้ไขอาคารทรุด
การแก้ไขอาคารทรุด สามารถกระทำโดยการเสริมเสาเข็มเข้าไปรับโครงสร้างให้เพียงพอเพื่อให้สามารถรับน้ำหนักโครงสร้างที่มีปัญหา การกำหนดขนาด จำนวนเสาเข็มนั้นขึ้นอยู่กับการวิเคราะห์โดยขั้นตอนการวิเคราะห์เป็นดังนี้
- คำนวณน้ำหนักลงฐานราก (Column Load) ที่จะทำการเสริมเสาเข็ม
- เลือกชนิดของเสาเข็ม ขนาด และความยาวซึ่งพิจารณาได้จากข้อมูลดิน
- คำนวณกำลังรับน้ำหนักบรรทุกปลอดภัยของเสาเข็มที่จะเสริมจากข้อมูลดิน ตามชนิด ขนาด และระดับความลึกของปลายเสาเข็มที่จะเลือกใช้
- กำหนดจำนวนเสาเข็มที่จะเสริมในแต่ละฐานราก
- กำหนดตำแหน่งที่จะเสริมเสาเข็ม
- ทำการถ่ายน้ำนหักลงเสาเข็มที่เสริม

ประเภทของเสาเข็มสำหรับงานเสริมฐานราก
1. เสาเข็มเจาะ (Bored Pile)
2. เสาเข็มเหล็ก (Steel Pile)
3. เสาเข็มประกอบ (Composite Pile)

  ติดต่อสอบถาม

Steps to fix the collapsed building

fix a collapsed building
At present, the problem of subsidence of the building It is one of the major problems which directly affect the safety of building occupants. And the building itself The collapse of the building is seen both in Bangkok. And other provinces The property of building subsidence may vary depending on the components. 

That affect the foundation system of the building which can be summarized as follows:
1. Vertical collapse buildings which can be divided into 2 types as follows:

1.1 All foundations in buildings collapse which is the collapse of the whole building close to each other But there is a lot of subsidence This was mainly due to the use of short piles placed on very soft soil layers. Which this type of subsidence Cracks are rarely found in building structures.

1.2 The foundations in the buildings are unevenly collapsed. Caused by the foundation has a very different subsidence. But the collapse of the building remains vertical. The collapsed buildings of this type are often found cracks on the wall obliquely in the middle of the wall.

2. The building collapses and tilts. This is mainly due to the misalignment of the building foundation. And indented in the same direction or the collapse of the foundation on the outer edge of the building causing the collapse of the building to tilt to one side and made the opposite building look like it was raised. This type of subsidence usually does not cause cracks in the walls. Or structure But most of the cracks occur at the pier or pile of the building on the raised side.

Subsidence cause Most of them are caused by the following reasons:

1. The pile is too short.
2. Faulty piles
3. Eccentric foundation
4. The ends of the piles are on different types of soil.
5. The movement of the soil
6. The pile can't support the load as required.

Repairing a collapsed building
repairing a collapsed building Can be done by adding piles to receive the structure enough to be able to support the weight of the structure in question. The size determination of the pile depends on the analysis by the analysis process as follows.

- Calculate the weight of the foundation (Column Load) to be reinforced piles
- Choose the type of pile, size and length which is determined from soil data.
- Calculate the safe loading capacity of the piles to be reinforced from the soil data according to the type, size and depth of the pile tip to be used.
- Determine the number of piles to be reinforced in each foundation.
- Determine where to reinforce piles
- Transfer the broken water onto the supporting piles.

Types of piles for foundation reinforcement

Bored Pile
2. Steel Pile

3. Composite Pile

  ติดต่อสอบถาม

修复倒塌建筑物的步骤
修复倒塌的建筑物
目前,建筑物的下沉问题是直接影响建筑物居住者安全的主要问题之一。和建筑物本身 建筑物的倒塌在曼谷都可以看到。而其他省份建筑物沉降的属性可能会因组件而异。 
对建筑物地基系统的影响可归纳如下:

1. 垂直倒塌建筑物可分为以下2种类型:
1.1 建筑物地基全部倒塌,即整栋建筑物相互靠拢倒塌,但有大量下沉,这主要是由于在非常软的土层上使用了短桩。这种类型的沉降裂缝在建筑结构中很少发现。
1.2 建筑物地基倒塌不均。由地基引起的下沉有很大不同。但建筑物的倒塌仍然是垂直的。这类倒塌的建筑物,往往在墙体中间的斜面上发现裂缝。
2、建筑物倒塌倾斜。这主要是由于建筑基础的错位。并在同一方向缩进或建筑物外缘的基础倒塌导致建筑物倒塌向一侧倾斜并使对面的建筑物看起来像被抬高了。这种类型的沉降通常不会导致墙壁出现裂缝。或结构但大部分裂缝发生在建筑物的桥墩或桩上的凸起侧。

下沉原因 大部分是由以下原因造成的:
1.桩太短。
2. 故障桩
3.偏心基础
4. 桩端位于不同类型的土壤上。
5. 土壤的运动
6.桩不能按要求支撑载荷。

修复倒塌的建筑物

修复倒塌的建筑物 可以通过添加桩来接收足以支撑相关结构重量的结构来完成。桩的尺寸确定取决于以下分析过程的分析。
- 计算要加固桩的基础重量(柱荷载)。
- 选择根据土壤数据确定的桩类型、尺寸和长度
- 根据要使用的桩尖的类型、尺寸和深度,根据土壤数据计算要加固的桩的安全承载能力。
- 确定每个基础中要加固的桩数。
- 确定在哪里加固桩
- 将破碎的水转移到支撑桩上。

地基加固桩的种类

钻孔桩
2. 钢桩

3. 复合桩

  ติดต่อสอบถาม

ความคิดเห็น

ประกาศล่าสุดในบอร์ดเดียวกัน