DIY ถังเปล่า ให้เป็นกระถางพิมพ์ลายไม้เก่า สวยสมจริงจนแยกไม่ออก !

lookmoo1981 profile image lookmoo1981

DIY ถังเปล่า ให้เป็นกระถางพิมพ์ลายไม้เก่า สวยสมจริงจนแยกไม่ออก !

ขั้นตอนการทำเราเริ่มจากผสมปูนและทรายให้เข้าก่อนในอัตราส่วน 1 : 1 เมื่อปูนและทรายเข้ากันดีแล้วจึงเทกาวประสานคอนกรีตลงไปพอประมาณ ใช้วิธีค่อย ๆ เททีละน้อยและคนให้เข้ากันจนได้เนื้อปูนที่ไม่เหลวไปหรือแข็งไป (เราใช้ Activator แทนน้ำ)จากนั้นก็เริ่มโอบปูนที่ถังได้เลย โดยค่อย ๆ ตบเนื้อปูนจากด้านล่างของถังขึ้นไปด้านบน เพื่อให้เนียนเรียบและสามารถควบคุมการย้อยตัวของปูนได้ง่ายและแผ่นปูนที่เห็นนี่ก็มาจากเศษปูนเหลือจากที่เราผสมกาวประสานคอนกรีตไว้ ดูซิบางขนาดนี้ยังอยู่ตัวได้เลย ยืนยันอนุภาคของน้ำยา Activator ได้เป็นอย่างดีเลยใช่ไหมล่ะ ? เมื่อโอบขึ้นปูนเรียบร้อยแล้วก็จะเริ่มกลิ้งสร้างลายไม้ได้เลย แต่ก่อนกลิ้งพิมพ์ลาย ต้องฉีดน้ำยาลอกแบบที่ลูกกลิ้งและที่ผิวปูนให้ทั่วเพื่อป้องกันเนื้อปูนติดลูกกลิ้งออกมาการกลิ้งสามารถกลิ้งได้มากกว่าหนึ่งรอบ โดยรอบแรกออกแรงกดเบา ๆ ก็พอ แค่ให้เริ่มเกิดลายก่อนในตอนแรก แล้วจึงมากลิ้งซ้ำเพื่อเสริมเติมแต่งให้ได้ลักษณะลวดลายไม้ที่ต้องการ ลักษณะการกลิ้งก็คล้ายกับการโอบปูนคือกลิ้งจากด้านล่างขึ้นบนอาจไม่ต้องรอโอบปูนจนรอบถังก่อนแล้วจึงกลิ้งพิมพ์ลาย เพราะเนื้อปูนจะแห้งจนยากต่อการกลิ้ง สามารถโอบไปกลิ้งไปได้เลย (แต่รอปูนหมาดด้วยนิดนึงนะ)ส่วนขอบปากถังด้านบนช่างเราเลือกที่จะโอบเป็นลำดับสุดท้ายเพราะต้องอาศัยความปราณีตและใจเย็นสักนิด เนื่องจากส่วนนี้วัสดุเป็นอลูมิเนียม ต้องปั้น ๆ เนื้อปูนให้เป็นก้อนแล้วจึงต่อย ๆ โอบให้เข้ารูปเมื่อแต่งลวดลายจนพอใจแล้วก็ทิ้งไว้ให้ปูนแห้งสนิท อย่างน้อย 16 – 24 ชม. ก่อนจะมาเริ่มลงสีกัน แต่ไม่ควรนำไปตากแดดแรง ๆ โดยตรง เพราะอาจทำให้ปูนแตกได้ แนะนำว่าให้ไว้ในที่โล่งมีอากาศถ่ายเทก็พอเมื่อปูนแห้งสนิทแล้วก็สามารถเริ่มลงสีได้เลย เราเลือกใช้สี Antique Color อีกแล้ว (ติดใจจากก่อนหน้านี้ ใช้แล้วสีสวยถูกใจมากกกก ไปตามย้อนอ่านกันได้ 2 Blog เลย ทั้งเรื่องการตกแต่งแผ่นหินเทียม และ 6 เฉดสี) ก็เช่นเดิมเราต้องทาสีรองพื้นก่อนโดยเราเลือกเป็นเฉดน้ำตาล และไม่ผสมน้ำ

 ติดต่อสอบถาม

DIY empty buckets into old wood-printed pots It's so realistic that it's indistinguishable!

1 When the mortar and sand are mixed well, then pour the concrete binder in moderation. Use the method of gradually pouring little by little and stir until the mortar is not too liquid or hard (we use Activator instead of water), then Begin to wrap the mortar on the bucket by gently slapping the mortar from the bottom of the bucket upwards. In order to be smooth and able to control the sagging of the mortar easily, and the mortar seen here comes from the residual mortar from which we mixed the concrete adhesive. Look, some of this size is still alive. Confirms the particles of the Activator potion very well, isn't it? Once the mortar has been wrapped, it will begin rolling to create a wood grain. but before rolling The peeling solution must be sprayed on the roller and the mortar surface thoroughly to prevent the mortar from sticking to the roller. Rolling can roll more than one round. The first round, applying gentle pressure is enough, just to start the pattern first. Then come rolling again to add to the desired look of the wood pattern. The rolling style is similar to embracing the mortar, which is rolling from the bottom up, may not have to wait until the mortar wraps around the drum before rolling in the print. Because the mortar is dry and difficult to roll. can be rolled over (But wait for the cement to dry a little) As for the edge of the mouth of the bucket above, we choose to embrace the last order because it requires a bit of care and patience. Since this part is made of aluminum material, it must be molded into lumps of cement, then punched and wrapped around it to form a shape when the pattern is satisfied and then left for the cement to dry completely at least 16-24 hours before starting. paint together But should not be placed in direct sunlight as it may cause the cement to crack. It is recommended to keep it in the open air with enough ventilation, once the cement is completely dry, you can start painting. We chose Antique Color again (I was attracted to it from the previous one. After using it, the color is very attractive. Let's go back and read it in 2 Blogs (both about the decoration of artificial stone slabs and 6 shades) as before, we have to paint the primer first by choosing a brown shade and not mixing water. Before starting to paint But should not be placed in direct sunlight as it may cause the cement to crack. It is recommended to keep it in the open air with enough ventilation, once the cement is completely dry, you can start painting. We chose Antique Color again (I was attracted from the previous one. After using it, the color is very attractive. Let's go back and read it in 2 Blogs (both about the decoration of artificial stone slabs and 6 shades) as before, we have to paint the primer first by choosing a brown shade and not mixing water.

 ติดต่อสอบถาม

将空桶DIY成旧木印花盆 太真实了,简直无法分辨!

1 当砂浆和砂子混合均匀后,再适量浇注混凝土结合剂,用一点一点的方法慢慢浇注,搅拌至砂浆不太流动或太硬(我们用活化剂代替水),然后开始从桶底部向上轻轻拍打砂浆,将砂浆包裹在桶上。为了光滑且容易控制砂浆的流挂,这里看到的砂浆来自我们混合混凝土粘合剂的残留砂浆。看,这种大小的一些还活着。很好地确认了活化剂的粒子,不是吗?一旦砂浆被包裹起来,它就会开始滚动以形成木纹。但在滚动之前 剥离液必须彻底喷洒在辊筒和砂浆表面,防止砂浆粘在辊筒上,滚动可以滚动一圈以上。第一轮,施加温和的压力就足够了,只是先开始模式。然后再次滚动以添加所需的木材图案外观。滚动方式类似于拥抱砂浆,从下往上滚动,可能不必等到砂浆环绕滚筒再滚动打印。因为砂浆是干的,很难碾压。可以翻身 (但要等水泥干一点)至于上面的桶口边缘,我们选择拥抱最后一个顺序,因为它需要一点细心和耐心。由于这部分是铝材,所以必须先成型成块状的水泥,然后在满足图案的情况下打孔并缠绕成型,然后至少在开始前16-24小时让水泥完全干燥. 一起画画 但不应放置在阳光直射的地方,因为它可能会导致水泥开裂。建议将其保持在通风良好的露天环境中,一旦水泥完全干燥,就可以开始上漆。我们再次选择了古色古香的颜色(我被上一个吸引了。用了之后,颜色很诱人。回过头来看看之前的2个博客(都是关于人造石板的装饰和6色系),我们要先涂底漆,选择棕色而不是掺水。在开始作画之前 但不应放置在阳光直射的地方,因为它可能会导致水泥开裂。建议露天放置,通风充足,等水泥完全干透后,即可开始涂装。我们再次选择了古色古香的颜色(我被上一个吸引了。用了之后,颜色很诱人。回过头来看看之前的2个博客(都是关于人造石板的装饰和6色系),我们要先涂底漆,选择棕色而不是掺水。

 ติดต่อสอบถาม

ความคิดเห็น

ประกาศล่าสุดในบอร์ดเดียวกัน